CAT5E SFTP PATCH CORD
The CAT5E patch cord are idea for data applications. It applies to Computers ,Hubs ,Switches,Routers,DSL/cable modems ,Patch panel and so on .with Fast transmission and excellent signal quality which exceed performance requirement specified by TIA/EIA-568C.2.
Horizontal patch cable.
Support current category 5 applications, such as: 10 Base-T, 100 Base-T, FDDI, ATM.
Conductor |
Solid Bare Copper Or Stranded Bare Copper |
Conductor Dia. |
24AWG or 26AWG |
Insulation |
HDPE |
Insulation Dia. |
0.91±0.05mm |
Drain wire |
CCA |
Shield |
AL Foil and Braid |
Jacket |
PVC |
Jacket Dia. |
6.2±0.2mm |
Connector |
Metal CAT5E RJ45 8P8C |
Plug |
Gold plated |
Color |
Optional |
Length |
Optional |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
Characteristic Impedance: |
100±15Ω |
Conductor Resistance |
≤9.38Ω/100m |
Insulation Resistance: |
100mΩ |
Mutual Capacitance: |
<5.6nF/100m |
Resistance Unbalance: |
5%Max |
Capacitance Unbalance: |
330pF/100m |
Current Rating: |
1.5A |
Dielectric Strength: |
1,000 V RMS @ 60 Hz for 1 minute |
Insulation Resistance: |
500 M-Ohm Minimum |
Max Contact Resistance: |
20 mOhm
|
ENVIRONMENTAL CHARACTERISTICS : |
Operation range |
-20°C to +60°C |
Installation range |
+0°C to +50°C |
Operation minimum bending radius |
20mm |
Installation minimum bending radius |
40mm. |
Maximum pulling tension |
80N. |
CAT5E UTP PATCH CORD
The CAT5E patch cord are idea for data applications. It applies to Computers ,Hubs ,Switches,Routers,DSL/cable modems ,Patch panel and so on .with Fast transmission and excellent signal quality which exceed performance requirement specified by TIA/EIA-568C.2.
Horizontal patch cable.
Support current category 5 applications, such as: 10 Base-T, 100 Base-T, FDDI, ATM.
Conductor |
Solid Bare Copper Or Stranded Bare Copper |
Conductor Dia. |
24AWG or 26AWG |
Insulation |
HDPE |
Insulation Dia. |
0.91±0.05mm |
Jacket |
PVC |
Jacket Dia. |
5.0±0.2mm |
Connector |
CAT5E RJ45 8P8C |
Plug |
Gold plated |
Color |
Optional |
Length |
Optional |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
Characteristic Impedance: |
100±15Ω |
Conductor Resistance |
≤9.38Ω/100m |
Insulation Resistance: |
100mΩ |
Mutual Capacitance: |
<5.6nF/100m |
Resistance Unbalance: |
5%Max |
Capacitance Unbalance: |
330pF/100m |
Current Rating: |
1.5A |
Dielectric Strength: |
1,000 V RMS @ 60 Hz for 1 minute |
Insulation Resistance: |
500 M-Ohm Minimum |
Max Contact Resistance: |
20 mOhm
|
ENVIRONMENTAL CHARACTERISTICS : |
Operation range |
-20°C to +60°C |
Installation range |
+0°C to +50°C |
Operation minimum bending radius |
20mm |
Installation minimum bending radius |
40mm. |
Maximum pulling tension |
80N. |
CAT5E UTP PATCH CORD
The CAT5E patch cord are idea for data applications. It applies to Computers ,Hubs ,Switches,Routers,DSL/cable modems ,Patch panel and so on .with Fast transmission and excellent signal quality which exceed performance requirement specified by TIA/EIA-568C.2.
Horizontal patch cable.
Support current category 5 applications, such as: 10 Base-T, 100 Base-T, FDDI, ATM.
Conductor |
Solid Bare Copper Or Stranded Bare Copper |
Conductor Dia. |
24AWG or 26AWG |
Insulation |
HDPE |
Insulation Dia. |
0.91±0.05mm |
Jacket |
PVC |
Jacket Dia. |
5.0±0.2mm |
Connector |
CAT5E RJ45 8P8C |
Plug |
Gold plated |
Color |
Optional |
Length |
Optional |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
Characteristic Impedance: |
100±15Ω |
Conductor Resistance |
≤9.38Ω/100m |
Insulation Resistance: |
100mΩ |
Mutual Capacitance: |
<5.6nF/100m |
Resistance Unbalance: |
5%Max |
Capacitance Unbalance: |
330pF/100m |
Current Rating: |
1.5A |
Dielectric Strength: |
1,000 V RMS @ 60 Hz for 1 minute |
Insulation Resistance: |
500 M-Ohm Minimum |
Max Contact Resistance: |
20 mOhm
|
ENVIRONMENTAL CHARACTERISTICS : |
Operation range |
-20°C to +60°C |
Installation range |
+0°C to +50°C |
Operation minimum bending radius |
20mm |
Installation minimum bending radius |
40mm. |
Maximum pulling tension |
80N. |
CAT6 FTP PATCH CORD
CAT6 patch cord are used for connecting the network equipment to patch panels and telecommunications outlets,It is a standardized twisted pair cable used specifically in gigabit(Gb) Ethernet networks at a higher transmission frequency of 250MHz, exceed performance requirements specified by the TIA/EIA-568B.2 &ISO/IEC 11801.
Conductor |
Solid Bare Copper or Strandard |
Conductor Dia. |
23AW/22AWG |
Insulation |
HDPE |
Insulation Dia. |
0.98±0.02mm |
Drain wire |
CCA |
Shield |
AL Foil |
Jacket |
PVC |
Connector |
Metal FTP RJ458P8C |
Plug |
Gold plated |
Jacket Dia. |
6.3±0.2mm |
Color |
Optional |
Length |
Optional |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
Characteristic Impedance: |
100±15Ω |
Conductor Resistance |
≤9.38Ω/100m |
Mutual Capacitance: |
<5.6nF/100m |
Resistance Unbalance: |
5%Max |
Capacitance Unbalance: |
330pF/100m |
Current Rating |
1.5 A |
Voltage Rating |
150 VAC |
Dielectric Withstanding Voltage |
1000 VAC |
Insulation Resistance |
500 MO (minimum) |
ENVIRONMENTAL CHARACTERISTICS : |
Operation range |
-10°C to 60°C |
Storage
|
– 40° C to +70° C |
CAT6 UTP PATCH CORD
CAT6 patch cord are used for connecting the network equipment to patch panels and telecommunications outlets,It is a standardized twisted pair cable used specifically in gigabit(Gb) Ethernet networks at a higher transmission frequency of 250MHz, exceed performance requirements specified by the TIA/EIA-568B.2 &ISO/IEC 11801.
Conductor |
Solid Bare Copper or Strandard |
Conductor Dia. |
23AW/22AWG |
Insulation |
HDPE |
Insulation Dia. |
0.98±0.02mm |
Jacket |
PVC |
Connector |
CAT6 RJ458P8C |
Plug |
Gold plated |
Jacket Dia. |
6.0±0.2mm |
Color |
Optional |
Length |
Optional |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
Characteristic Impedance: |
100±15Ω |
Conductor Resistance |
≤9.38Ω/100m |
Mutual Capacitance: |
<5.6nF/100m |
Resistance Unbalance: |
5%Max |
Capacitance Unbalance: |
330pF/100m |
Current Rating |
1.5 A |
Voltage Rating |
150 VAC |
Dielectric Withstanding Voltage |
1000 VAC |
Insulation Resistance |
500 MO (minimum) |
ENVIRONMENTAL CHARACTERISTICS : |
Operation range |
-10°C to 60°C |
Storage
|
– 40° C to +70° C |
CAT6 UTP PATCH CORD
CAT6 patch cord are used for connecting the network equipment to patch panels and telecommunications outlets,It is a standardized twisted pair cable used specifically in gigabit(Gb) Ethernet networks at a higher transmission frequency of 250MHz, exceed performance requirements specified by the TIA/EIA-568B.2 &ISO/IEC 11801.
Conductor |
Solid Bare Copper or Strandard |
Conductor Dia. |
23AW/22AWG |
Insulation |
HDPE |
Insulation Dia. |
0.98±0.02mm |
Jacket |
PVC |
Connector |
CAT6 RJ458P8C |
Plug |
Gold plated |
Jacket Dia. |
6.0±0.2mm |
Color |
Optional |
Length |
Optional |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
Characteristic Impedance: |
100±15Ω |
Conductor Resistance |
≤9.38Ω/100m |
Mutual Capacitance: |
<5.6nF/100m |
Resistance Unbalance: |
5%Max |
Capacitance Unbalance: |
330pF/100m |
Current Rating |
1.5 A |
Voltage Rating |
150 VAC |
Dielectric Withstanding Voltage |
1000 VAC |
Insulation Resistance |
500 MO (minimum) |
ENVIRONMENTAL CHARACTERISTICS : |
Operation range |
-10°C to 60°C |
Storage
|
– 40° C to +70° C |
CAT6A U/FTP PATCH CORD
Cat6A U/FTP Cable provides excellentl performance to support extremely high speed applications, The individually shielded pairs ensure maximum transmission and improve alien crosstalk performance, with a frequency of 500MHZ can transmit data at 10BAST-T,100BASETX,1000BASE-T and 10G BASE-T(Gigabit Ethernet) and also complies to standard TIA/EIA-56.2-D&IEC61156.
Conductor |
Solid Bare Copper /Stranded Copper |
Conductor Dia. |
23AWG /26AWG/ |
Insulation |
HDPE |
Insulation Dia. |
1.3±0.02mm |
Pair Screen:
|
each pair surrounded individually by Al Foil |
Jacket |
PVC/LSZH |
Drain Wire |
CCA |
Jacket Dia. |
7.5±0.2mm |
Connecotor |
Metal RJ45 8P8C |
Plug |
Gold plated |
Color |
Optional |
Length |
Optional |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
Characteristic Impedance: |
100±15Ω |
Conductor Resistance |
≤9.38Ω/100m |
Mutual Capacitance: |
<5.6nF/100m |
Resistance Unbalance: |
5%Max |
Capacitance Unbalance: |
330pF/100m |
Current Rating |
1.5 A |
Voltage Rating |
150 VAC |
Dielectric Withstanding Voltage |
1000 VAC |
Insulation Resistance |
500 MO (minimum) |
ENVIRONMENTAL CHARACTERISTICS : |
Operation range |
-10°C to +60°C |
Storage |
-40°C to +70°C |
CAT 7 SFTP PATCH CABLE
Cat7SFTP cable provides superior performance to ensure reliability in delivering 10G network speed at at a bandwidth up to 600 MHz. Its design of each twisted pair is shielded individually with aluminium foil to add physical separation between the four pairs and prevent internal cross talk .The excellent shielding of four pairs with overall braided screen to prevent immunity from electromagnetic interference. It applys to 10GBase-T (10 Gigabit Ethernet), 1000Base-T (Gigabit Ethernet), 100 Base-T, 10 Base-T, FDDI, ATM and meets the standard of ISO/IEC11801& IEC61156-5&EN50173.
Conductor |
Solid /Stranded Bare Copper |
Conductor Dia. |
23AWG 0.58mm/0.16mm |
Insulation |
HDPE |
Insulation Dia. |
1.33±0.02mm |
Shield: |
Individually Al. Foil + Overall Braid Shield |
Jacket |
PVC/LSZH |
Jacket Dia. |
7.8±0.2mm |
Connector |
Gold plated Metal CAT7 RJ45 8P8C |
Plug |
Gold plated |
Number of shielded pairs |
Colour code pair 1 |
Blue-White / Blue |
Colour code pair 2 |
Orange-White / Orange |
Colour code pair 3 |
Green-White / Green |
Colour code pair 4 |
Brown-White / Brown |
ELECTRICAL CHARACTERISTICS: |
High frequency (at 20°) |
Type |
Attenuation |
NEXT |
PS NEXT |
ACR |
PS ACR |
ACR-F |
PS ACR-F |
Return Loss |
1 |
2.0 |
78.0 |
75.0 |
76 |
73.0 |
78.0 |
75.0 |
20.0 |
4 |
3.7 |
78.0 |
75.0 |
74.3 |
71.3 |
78.0 |
75.0 |
23.0 |
10 |
5.9 |
78.0 |
75.0 |
72.1 |
69.1 |
75.3 |
72.3 |
25.0 |
16 |
7.4 |
78.0 |
75.0 |
70.6 |
67.6 |
71.2 |
68.2 |
25.0 |
31.2 |
10.4 |
78.0 |
75.0 |
67.6 |
64.6 |
65.4 |
62.4 |
23.6 |
62.5 |
14.9 |
75.5 |
72.5 |
60.6 |
57.6 |
59.4 |
56.4 |
21.5 |
100 |
19.0 |
72.4 |
69.4 |
53.4 |
50.4 |
55.3 |
52.3 |
20.1 |
125 |
21.4 |
70.9 |
67.9 |
49.6 |
46.6 |
53.4 |
50.4 |
19.4 |
200 |
27.5 |
67.9 |
64.9 |
40.4 |
37.4 |
49.3 |
46.3 |
18.0 |
250 |
31.0 |
66.4 |
63.4 |
35.5 |
32.5 |
47.3 |
44.3 |
17.3 |
300 |
34.2 |
65.2 |
62.2 |
31.1 |
28.1 |
45.8 |
42.8 |
17.3 |
600 |
50.1 |
60.7 |
57.7 |
10.6 |
7.6 |
39.7 |
36.7 |
17.3 |
Low frequency and D.C. (at 20°C) |
Specification |
Unit |
D.C. resistance conductor |
< 9,5 |
Ω/100m |
Insulation resistance |
≥5000 |
MΩ.km |
Mutual capacitance |
< 56 |
nF/km |
Capacitance unbalance pair to ground |
< 1600 |
pF/km |
Dielectric strength conductor (2 sec.) |
2.5 |
kV DC |
Characteristic impedance: |
(1-100 MHz) |
(100 ± 5) Ω |
(100 – 250) MHz |
(100 ± 10) Ω |
(250 – 600) MHz |
(100 ± 15) Ω |